Language:

English

Home / All / Fully-Automatic Packaging Machine / High Speed Eight-head Automatic Spout Pouch Filling And Packing Machine manufacturer

High Speed Eight-head Automatic Spout Pouch Filling And Packing Machine manufacturer

High Speed 8 Heads Automatic Spout Pouch Filling And Packing Machine manufacturer can suppy different spout pouch sealing machines and filling machines

Share
Categories	Fully-Automatic Packaging Machine
Trademark/Brand	fame machinery packaging machines manufacturer
Packaging products	Liquid and pastes
Filling specification	30-2000ML
Hopper size	150L（304 stainless steel ）
Machine power	8Kw
FOB port	Guangzhou/Shenzhen
Terms of Payment	Western Union, MoneyGram, T/T, Paypal
Update Time	Dec 8,2025

Contact Now

Detail Information

Product Introduction and Description

Parameter

Application

Video

Introduction of Eight-head Automatic Spout Pouch Filling And Packing Machine

Shutting down and routine maintenance

1. Correct Shutdown Sequence:

First, stop the material supply and allow the equipment to process the remaining material and film.

Turn off the heating system and allow the equipment to continue running at low speed for a period of time while cooling to prevent the mold from deforming due to prolonged high temperatures.

Finally, turn off the main power and air supply.

2. Daily/Shift Cleaning:

Thoroughly clean the inside and outside of the equipment, including the mold, hopper, conveyor belt, etc.

Add the specified lubricating oil to components requiring lubrication (such as guide rails and bearings).

3. Regular Maintenance:

Weekly/Monthly Maintenance: Check the tightness of all transmission components (such as timing belts and chains), check and drain the air filter, and tighten the screws in critical areas.

Annual Maintenance: It is recommended that a comprehensive inspection, calibration, and replacement of vulnerable parts (such as seals, heating elements, and thermocouples) be performed by a professional technician.

Safety Precautions of Eight-head Automatic Spout Pouch Filling And Packing Machine

Strictly follow the operating procedures: Untrained personnel are strictly prohibited from operating the equipment.

Use safety guards: All protective covers and safety doors on the equipment must remain closed during operation; removal or shielding is strictly prohibited.

Beware of high temperatures and moving parts: The sealing mold and other parts of the machine will reach extremely high temperatures during operation and immediately after shutdown; touching them is strictly prohibited. Also, keep away from moving parts such as the cutter and drive shaft.

Use the emergency stop button effectively: In any emergency, press the emergency stop button immediately.

Perform maintenance and repairs with the power off: Before performing any adjustments, cleaning, or repairs, the main power must be turned off and the machine locked and tagged (LOTO) to prevent accidental restarting.

Precautions of Eight-head Automatic Spout Pouch Filling And Packing Machine

1. Equipment Status Confirmation:

Check all equipment components for integrity, ensuring there are no loose, detached, or damaged parts (such as the suction hopper, forming device, sealing mold, etc.).

Confirm there are no tools, screws, or other foreign objects left inside the machine or on the conveyor belt.

Check that the emergency stop button is in the released position.

2. Power and Air Supply Check:

Ensure the power supply voltage is stable and meets equipment requirements.

Check that the compressed air pressure reaches the set value (usually 0.6-0.8 MPa) and ensure there are no leaks in the air lines. Insufficient air pressure is one of the main causes of incomplete sealing and improper operation.

3. Material Preparation:

Film Roll: Check that the film material and specifications are correct, the installation direction is correct, and the tension adjustment is appropriate. Ensure the film surface is free of wrinkles and damage.

Suction Nozzle: Check that the suction nozzle specifications are correct, ensure there is sufficient material in the suction hopper, and check that the feeding track is unobstructed.

Product: Ensure the characteristics of the product to be packaged (such as powder flowability, liquid viscosity, particle size) match the equipment capacity.

4. Temperature Control System Preheating:

Set the sealing temperature in advance (horizontal sealing, vertical sealing, nozzle sealing, etc.) according to the material and thickness of the packaging film.

Sufficient preheating is essential. Production should only begin after the set temperature has been reached and stabilized; otherwise, it may result in weak seals or burn-through of the film.

Applicable Products of Eight-head Automatic Spout Pouch Filling And Packing Machine

This automatic liquid spout pouch filling and packing machine is versatile across multiple liquid industries.

* Food: Widely used for food liquids like juice, soy sauce, ketchup, peanut butter,jelly etc.

* Daily Chemicals: Ideal for shampoo, hand soap, laundry detergent, lotion, chemical engine oil etc.

* Medical: Perfect for fluid and semi-viscous liquids like antiseptic liquid, syrup, injection liquid, other liquid medications etc.

* Health care products: ideal choice for nutrient solution, oral liquid, etc.

* Dairy products: good choice for different milk,modified milk, cream.etc.

KeyWords

Machine type	Eight-head Automatic Spout Pouch Filling and Packing Machine
Packaging products	Liquid and pastes
Measuring type	Piston pump（304 stainlees steel ）
Filling specification	30-300ML
Hopper size	200L (304 stainless steel)
Middle spout pouch bag size	width: 60-160, height: 60-280 (mm)
Slanted-mouth spout pouch bag size	width: 60-340, height: 60-300 (mm)
Production speed	1.30-100ml: about 150-200 bags /min 2. 100-200ml: about 100-150 bags/min（Speed is related to factors such as material capacity, viscosity and packaging material standardization）
Voltage/ power	380V 50HZ
Machine power	9Kw
Machine weight	About 1800KG
Aluminium parts	Aluminum disc anodizing
Material for machine	304 stainless steel
Material for filling head	304 stainle es steel
Turntable principle	Cam indexer
Machine size	Length 3100* width 2300*height 1900mm
Operating principle	Manual bagging -automatic bagging-automatic filling-automatic cap feeding -automatic cap-locking -automatic bagging

High Speed Eight-head Automatic Spout Pouch Filling And Packing Machine manufacturer

Introduction of Eight-head Automatic Spout Pouch Filling And Packing Machine

Safety Precautions of Eight-head Automatic Spout Pouch Filling And Packing Machine

Eight-Head Automatic Spout Pouch Filling And Packing Machine Specifications

Precautions of Eight-head Automatic Spout Pouch Filling And Packing Machine

Applicable Products of Eight-head Automatic Spout Pouch Filling And Packing Machine

Six-head automatic spout bag liquid packaging machine video

Products

industry Solutions

Company